GestaltungselementTACO-NAUERT    GmbH & Co. KG

GestaltungselementCable conductor tester and metal detector.

ISO Cert SiegelLogo Taco-Nauert

Gestaltungselement

H o m e
Gestaltungselement

Our products:

Gestaltungselement
Kit
Continuity testers
Continuity testers with additional functions
Cable sequencer
Metal detector
Cable conductor tester
Tester headphones
General-purpose test adapters
Accessories
Indust. products, developments
Gestaltungselement
Graue Linie
Gestaltungselement
Download
Gestaltungselement
Graue Linie
Gestaltungselement

Navigation:

Gestaltungselement
Contact/e-mail
Our partners
Data privacy
Legal notice


Flagge deFlagge enFlagge fr

CONTITEST® 817 Digital DATASAFE, continuity tester, can be enabled remotely, with special functions (item-no.: 0140)



CONTITEST® 817 continuity tester model 817 provides numerous testing functions, from simple checking of connections to testing of various semiconductors. It has the same characteristics as the CONTITESTÆ 807, but with the difference that in signal generator mode the remotely enabled AF signal consists of a 1-kHz square-wave tone rather than a sweeping tone. In addition, the CONTITEST® 817, displays external DC and AC voltages starting at > 5 volts.
The test tone of the signal generator is only activated when current can flow between the two test leads. This is possible when a load of 100 Ω to 15 kΩ is connected to the test leads. Conductor pairs can be identified uniquely this way, because crosstalk is ruled out with this testing method.


Specifications of the CONTITEST® 817 Digital DATASAFE Sketch
Continuity tester Switch position: T
The CONTITEST 852 can be used as a receiver, but correct polarity is required.
Continuity tester range: 0 - 1 MΩ
Test voltage max.: 4,2 V
Test current max.: 120 µA
AF signal range: 0 Hz - 1,5 kHz
Tonsender: AC/DC > 5 V
Able to withstand voltages up to: 250 V AC
External current consumption max.: 20 mA
Transmitter Switch position: S
Can be switched on remotely: 100 Ω - 15 kΩ
Tonsender: 1 kHz
Amplitude at 600 Ω: 0,8 Vss
Amplitude at 10 kΩ: 2,5 Vss
Voltage tester: AC/DC > 5 V
Able to withstand voltages up to: 250 V AC
External current consumption max.: 20 mA
Delivery includes: tester, including batteries (3 Micro AAA cells)
Pair of high-quality test leads, length 1.50 m
Instruction manual

As usual, no responsibility is taken for the correctness of the details provided. The right is reserved to make technical modifications. For additional information, refer to the PDF document.
In order to view PDF documents, you need the free Adobe Reader, which you can download here. Symbol ADOBE Acrobat Reader

Seitenzähler taco-nauert.com

Elektronic development, sales & manufacture of testing equipment  |  TACO-NAUERT GmbH & Co. KG  |  Autenbachstr. 4  |  D-73035 Göppingen  |  Tel.: +49 (0) 7161 929423

+++ TACO-NAUERT GmbH & Co. KG +++ CONTITEST +++ TALK&TEST +++ Continuity testers with and without auxiliary features +++ Line sorters +++ Line detectors +++ Cable conductor testers with and without a headset +++ Test earphones +++ General-purpose test adapters +++ Accessories for cables +++ Experimental electronics kit for school students +++